JBL EON 210P

JBL EON 210P

The EON 210P is a self-contained, portable pa system featuring multiple input channels with individual tone controls, multiple digital effects and convenient output routing capabilities that allow the user to integrate the system into any number of audio environments. With its lightweight and ergonomic design the EON 210P is perfect for situations where ease and portability are just as important as quality and flexibility.

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.

Features:

Specifications:

The lightest portable PA

available on the market

£849.00
(inc vat)

CALL FOR A DEMO

Behringer Europort EPA300

Behringer Europort EPA300

• Ultra-Compact 300-Watt 6-Channel Portable PA System with Digital Effects and FBQ Feedback Detection
  
• Ultra-compact 300-Watt, 6-channel portable PA system
  
• Enormous power, incredible sonic performance, and super-light weight means no more lugging around dead weight
  
• Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers for incredible sound reproduction
  
• Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various
• multi-effects
  
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  
• 6-channel mixer section features 2 mono and 2 stereo channels plus separate CD inputs
  
• 2 high-quality mic preamps with switchable +48 V phantom power for condenser microphones
  
• Effective, extremely musical 2-band EQ, switchable Pad and Clip LEDs on all mono channels
  
• Stereo 5-band graphic EQ allows precise frequency correction of main outputs
  
• Voice Canceller function removes singer's voice from recordings for Karaoke applications
  
• Comes with one BEHRINGER XM1800S microphone, mic clip and 20' cables
  
• Integrated storage compartment for microphone, cables, and accessories
  
• "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
  
• High-quality components and exceptionally rugged construction ensure long life
  
• Conceived and designed by BEHRINGER Germany

CALL FOR A DEMO

£399.00
(inc vat)

Experience HK AUDIO: They are more convienient to transport, faster to set up and have superior sound.

No matter what your gig may be - a big band in a huge marquee or an Entertainer/DJ at black tie events - the HK AUDIO Active Systems line offers intelligent audio tools tailored to meet your demands.

SYSTEM

Key Features

• All-in-One System
• 600 watts class D power
• Integrated 4-channel-mixer
• Ipod/MP3 Player socket built in
• Modern linesource technology
• 3 x 6" Subwoofer
• 6 x 3.5" Mid/High Speaker

System Specifications:

Built in Mixer / Amp Specifications:

The World’s Fastest PA

The mid/high-range unit features six custom widerange speakers of the same breed that deliver such sublime sound in the ELEMENTS system. Aligned vertically, they enable SOUNDCADDY ONE to deliver all the superior benefits of a line array, including a uniform coverage pattern that spreads sound pressure evenly throughout the audience area. Your message comes across loud and clear to everyone in the audience from the front row to the back. Engineered specifically for SOUNDCADDY ONE, the subwoofer is loaded with three 6“ woofers that provide the perfect underpinning for the lower frequency range.

SOUNDCADDY ONE’s Class-D power amp pumps out 600 watts – that’s plenty of oomph for many situations. This mobile miracle in sound reinforcement gets the job done in schools and government offices lacking a permanently installed PA. It’s also a sweet solution for exhibitions, fashion shows, car dealerships, churches, and conferences. And SOUNDCADDY ONE is the perfect companion for one-man/woman bands and entertainers seeking a system that sets up and tears down in a flash, but brooks no compromises when it comes to sound.

SYSTEM PRICE

£1640.00 (inc vat)

 

SOUNDCADDY ONE COVER

£CALL

Always the perfect solution
ELEMENTS adapts to your needs. At all times and in all places. Without compromising. It's a powerful P.A. for the local town hall today, an unobtrusive setup for that elegant dinner party tomorrow, or a sound-pumping system for a wild wedding on the weekend. With just six Elements you always have what you need to configure the perfect solution for any situation.

E-Connect
Thanks to E-Connect, a unique new type of integrated coupler/bus, you can configure your ELEMENTS rig far more easily and quickly than conventional systems. Just a few minutes are all it takes to set up an ELEMENTS system. Simply snap the components together, automatically linking them via E-Connect, plug in your signal source, and let the show begin.

Minimum space
The ELEMENTS system leaves a tiny footprint on stage. What's more, even the most powerful 3600-watt version of the system easily fits into a compact car with enough space left over for another musician and his or her guitar.

Minimum effort
You can comfortably arrive at the gig wearing the clothes you'll perform in, since ELEMENTS can be set up so easily. The ultra-compact yet extremely rugged components weigh just a few kilograms. Never again will you break a sweat setting up and tearing down your rig!

Maximum elegance
The ELEMENTS system looks as modern as it feels. The elegant design will not only impress the person who hired you, but the system will also provide a striking setting for your performance.

Authentic HK AUDIO sound
The ELEMENTS system is a true line array that adapts to your needs. Whether you go with one, two, or four mid/high units, you can rest assured of a perfect match and awesome audio. Just like you have come to expect from HK AUDIO.

See www.hkaudio.com for more infomation

The Mighty Mite
Click Here for More Information on LUCAS SMART

The Entertainers Power Pack
Click Here for More Information on LUCAS PERFORMER

The Sound Sensation
Click Here for More Information on LUCAS IMPACT

£1038.00 Inc VAT

Including Stands, Leads & Covers

£1636.00 Inc VAT

Including Stands & Leads

Including Stands, Leads & Covers
£1685.00 Inc VAT

COME INSTORE FOR A DEMO

£1999.00 Inc VAT

Including Stands & Leads

Including Stands, Leads & Covers
£2051.00 Inc VAT

 
Maximum Sound and Power
Click Here for More Information on LUCAS MAX

 
The Compact High-end PA
Click Here for More Information on LUCAS ALPHA

£2936.00 Inc VAT

Including Stands & Leads

Including Stands, Leads & Covers
£3010.46 Inc VAT

£3222.00 Inc VAT

Including Stands & Leads

Including Stands, Leads & Covers
£3322.43 Inc VAT

Click here for more info on FAST

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

Click here for more info on DART

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

£529.00 each inc VAT

Including Cover - £549.00 Inc VAT

COME INSTORE FOR A DEMO

£709.00 each inc VAT

Including Cover - £729.00 Inc VAT

Click here for more info on ELIAS PX

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

Click here for more info on ESYS EPX

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

£2649.00 Inc VAT

Including Seperation Poles & Leads
£2699.00 Inc VAT

Including Seperation Poles, Leads & Covers
£2785.00 Inc VAT

COME INSTORE FOR A DEMO

£3509.00 Inc VAT

Including Covers
£3640.00 Inc VAT

Click here for more info on ACTOR DX

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

Click here for more info on PROJECTOR

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

£4942.00 Inc VAT

Including Covers
£5063.00 Inc VAT

£9097.00 Inc VAT

Including Covers
£9246.00 Inc VAT

Click here for more info on ICON

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

£13200.00 Inc VAT

HK AUDIO ELIAS PX TOP

Click here for more info on ELIAS PX Top

HK AUDIO ELIAS PX SUB

Click here for more info on ELIAS PX Sub

£716.00 Inc VAT EACH

Cover £20.00 Inc VAT

COME INSTORE FOR A DEMO

£716.00 Inc VAT EACH

Cover £23.79 Inc VAT

COME INSTORE FOR A DEMO

PREMIUM PRO ACTIVE 12a

PREMIUM PRO ACTIVE SUB 18a

Click here for more info on PREMIUM PR:O Activ 12

£589.00 Inc VAT EACH

Including Cover £609.00 Inc VAT

Click here for more info on PREMIUM PR:O Activ 18

£749.00 Inc VAT EACH

Including Cover £769.00 Inc VAT

PREMIUM PRO PASSIVE 12

PREMIUM PRO PASSIVE 15

Click here for more info on PREMIUM PR:O 12

£319.00 Inc VAT EACH

Including Cover £339.00 Inc VAT

Click here for more info on PREMIUM PR:O 15

£359.00 Inc VAT EACH

Including Cover £379.00 Inc VAT

PREMIUM PRO PASSIVE SUB 18

Click here for more info on PREMIUM PR:O SUB 18

£489.00 Inc VAT EACH

Including Cover £509.00 Inc VAT

JBL PRX612M - ACTIVE SPEAKER
12 in. Two-Way Multipurpose Self-Powered Sound Reinforcement System

PRX612M is the most compact and versatile speaker in the PRX600 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX612M is a perfect match with a PRX618S subwoofer, offering a high performance self-powered sub/sat system.

The PRX612M is comprised of a 305 mm (12in) 265F Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1000 watt (dual 500 watt) Crown® Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.

Key Features

• Maximum SPL 134db peak
• Dual purpose enclosure for both front-of house and floor monitor applications
• Eight M10 fly points for horizontal or vertical suspension. One M10 pull-back point
• Optimized EQ for monitor or front-of-house applications
• 305mm (12 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 37.5mm (1.5 in) annular polymer diaphragm, neodymium, compression driver
• 1000 Watt (Dual 500 watt) Class-D, Crown® amplifier
• DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and ¼" Mic/Instrument inputs, with loop through
• Dual-angle pole mount socket

Technical Specifications

• System Type : Self-powered 12", two-way, bass-reflex
• Maximum SPL Output : Full Range: 134 dB peak - Monitor: 133 dB peak
• Frequency Range (-10 dB) : Full Range: 50 Hz – 19.5 kHz - Monitor: 51 Hz – 19.5 kHz
• Frequency Response (±3 dB) : Full Range: 60 Hz – 17.5 kHz - Monitor: 61 Hz – 18.5 kHz
• Coverage Pattern : 90º x 50º nominal
• Amp Design : Crown® Class D
• Power Rating : 1000 W ( 2 x 500 )
• Dimension (H x W x D): : 592 mm x 353 mm x 340 mm ( 23.3 in x 13.9 in x 13.4 in )
• Net Weight : 15.6 kg ( 34.5 lb )

CALL FOR A DEMO

£799.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL PRX615M - ACTIVE SPEAKER
15 in. Two-Way Self-Powered Sound Reinforcement System

The 2-way 15" offers the perfect balance between size and performance. The PRX615M truly is an exception; it’s small, light weight, versatile and powerful. The performance and asymmetrical design make this a perfect choice for musicians, entertainers and DJ’s when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX600 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX615M delivers the optimum balance. For live music, recorded music playback and speech the user has the option of tailoring the EQ, ‘flat’ for speech intelligibility, and ‘boost’ for enhanced bass and crisp highs in recorded music playback. A microphone can be directly connected to the speaker input for quick PA applications. Coupled with a PRX600 sub-woofer the system becomes an efficient, full-range sound system.

The PRX615M is comprised of a 380 mm (15 in) 265F Differential Drive® dual voice-coil and magnetic gap, neodymium woofer, a 2408H-1 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1000 watt (dual 500 watt) Crown® Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.

Key Features

• Maximum SPL Output 135db peak
• 380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 37.5mm (1.5 in) annular polymer diaphragm, neodymium magnet compression driver
• 1000 Watt (dual 500 watt) Class-D, Crown® digital amplifier
• DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and ¼" Mic/Instrument inputs, with loop through
• Integrated 36mm dual-angle pole mount socket
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
• 8 M10 Suspension points and 1 pullback point

Technical Specifications

• System Type : Self-powered 15", two-way, bass-reflex
• Maximum SPL Output : Full Range: 135 dB peak - Monitor: 134 dB peak
• Frequency Range (-10 dB) : Full Range: 45 Hz – 19 kHz - Monitor: 48 Hz – 20 kHz
• Frequency Response (±3 dB) : Full Range: 54 Hz – 18 kHz - Monitor: 60 Hz – 18 kHz
• Coverage Pattern : 90º x 50º nominal
• Amp Design : Crown® Class D
• Power Rating : 1000 W ( 2 x 500 )
• Dimension (H x W x D) : 660 mm x 429 mm x 414 mm ( 26.0 in x 16.9 in x 16.3 in )
• Net Weight : 19.7 kg ( 43.5 lb )

CALL FOR A DEMO

£899.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL PRX618S - 18 in. Self-Powered Subwoofer System

Compact and powerful, the PRX618S offers the performance of an 18" subwoofer in a package not much larger than a typical 15" sub. With a pole receptacle (that accepts a SS3-BK or SS3-BK24) on the top panel and integrated stereo pass-thru, with selectable HP filter, this is the perfect compliment to the PRX600 full-range systems. Configured with a PRX612M or PRX615M the result is a highly transportable, high performance subs/satellite system. The addition of a polarity reverse options further enables integration with any top cabinet.

The PRX618S is a high performance self powered compact subwoofer system. The PRX618S is comprised of a 268G 460 mm (18") Differential Drive® dual voice-coil and magnetic gap, neodymium woofer driven by a Crown Class-D power amplifier. The amplifier input panel offers stereo or mono line level inputs via balanced XLR connectors as well as a single channel speaker level input via a ¼ inch TS phone jack. Signal processing, crossover functionality and limiting for the system is integrated into the input section functionality. Overall subwoofer input sensitivity is controlled by a single easy grip knob and a simple switch enables polarity reversal for sub/satellite system optimization. Signal present and limit lights indicate performance status.

All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.

Special note: JBL highly recommends that no more than 70 lbs of weight be placed on a speaker pole that is mounted to a PRX618S or PRX618S-XLF.

Key Features

• Maximum SPL 129 db peak
• 460 mm (18 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 600 Watt Class-D, Crown® digital amplifier
• Professional XLR line and ¼" Mic/Instrument inputs
• Stereo input and Loop-Thru capability
• Top panel 36mm pole mount socket for sub/satellite configuration
• 16 Gauge, dent resistant grille
• Obsidian DuraFlex™ coated plywood construction
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort

Technical Specifications

• System Type : Self-Powered 18", bass - reflex
• Maximum SPL Output : 129 dB peakFrequency Range (-10 dB) : 41 Hz – 130 Hz
• Frequency Response (±3 dB) : 50 Hz – 100 Hz
• Polarity : Normal or reverse polarity
• Crossover Frequency : 120 Hz
• Amp Design : Crown® Class D
• Power Rating : 600 W
• Dimension (H x W x D) : 685.8 mm x 530.9 mm x 614.7 mm ( 27.0 in x 20.9 in x 24.2 in )
• Net Weight : 32 kg ( 70.5 lb )
  

CALL FOR A DEMO

£1145.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL PRX618S-XLF - 18 in. Self-Powered Subwoofer System

The PRX618S-XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX618S-XLF performs with extreme efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.

The PRX618S-XLF is a high performance self-powered subwoofer system. The PRX618S-XLF is comprised of a powerful 2268FF Differential Drive® dual voice-coil and magnetic gap, neodymium woofer driven by a 1000 Watt (dual 500 watt) Crown Class-D power amplifier. Dual-Bridge Technology™ directly links discrete amplifier channel outputs to each voice coil in the Differential Drive woofer. Electrical power transfer to the transducer is optimized for more power performance. A proprietary DSP chip is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization. The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.

All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.

Special note: JBL highly recommends that no more than 70 lbs of weight be placed on a speaker pole that is mounted to a PRX618S or PRX618S-XLF.

Key Features

• Maximum SPL 133 db peak
• 460mm (18 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 1000 Watt (2 x 500 watt) Class-D, Crown® digital amplifier
• DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and ¼" Mic/Instrument inputs, with loop through
• Obsidian DuraFlex™ coated plywood construction
• Top panel M20 pole mount socket for sub/satellite configuration
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort

Technical Specifications

• System Type : Self-Powered 18", bass - reflex
• Maximum SPL Output : 133 dB peak
• Frequency Range (-10 dB) : 30 Hz – 105 Hz
• Frequency Response (±3 dB) : 39 Hz – 93 Hz
• Polarity : Normal or reverse polarity
• Crossover Frequency : 90 Hz
• Amp Design : Crown® Class D
• Power Rating : 1000 W ( 2 x 500 )
• Dimension (H x W x D) : 685.8 mm x 530.9 mm x 716.3 mm ( 27.0 in x 20.9 in x 28.2 in )
• Net Weight : 37 kg ( 81.5 lb )

CALL FOR A DEMO

£1249.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL EON315 - ACTIVE SPEAKER
Portable Self-Powered 15", Two-Way, Bass-Reflex Design

The EON315 is a 15-inch, two-way, powered, portable speaker system. It is a complete self contained sound reinforcement system, capable of full-bandwidth reproduction at high levels with the added benefit of a microphone pre-amp enabling the direct connection of a dynamic microphone. The EON315 is comprised of a 380 mm (15 in) JBL woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and system EQ functionality.

Key Features

• 280 watt Powered Speaker System
• Light Weight. True portability weighing only 15.9 kg (35 lb)
• Multiple handles for easy transport
• 15" JBL low-frequency driver
• 1" throat diameter next generation JBL neodymium compression driver
• Efficient Class-D digital amplifier technology
• 100° H x 60° V asymmetrical wave guide for uniform audience coverage
• Line level and direct microphone input capability
• Selectable Pre-engineered EQ settings
• Loop thru signal flow for extended system application and easy “daisy-chain” connections
• Integrated M10 suspension points for easy rigging
• Multi angle enclosure for main or monitor applications
• Integrated 36 mm pole mount socket with stabilizing securing screw
• Highly designed composite enclosures for durability, lightweight, and acoustic performance

Technical Specifications

• System Power Rating : 280 W continuous - 560 W peak
• Frequency Range (-10 dB) : 38 Hz - 20 kHz (EQ in ‘Flat’ position)
• Dimensions (H x W x D) : 685 mm x 438 mm x 366 mm (27 in x 17.3 in x 14.4 in)
• Frequency Response (±3 dB) : 50 Hz - 18 kHz (EQ in ‘Flat’ position)
• Coverage Pattern : 100° H x 60° V nominal
• Maximum SPL : 127 dB
• Net Weight : 15.9 kg (35 lb)
  

£450.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL EON510 - ACTIVE SPEAKER
Portable Self-Powered 10", Two-Way, Bass-Reflex Design The EON510 is a 10-inch, two-way, powered, portable speaker system. Capable of reproducing full bandwidth sound at high levels it offers the additional utility of a 3 channel built-in mixer. The EON510 is comprised of a 254 mm (10 in) Differential Drive® woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and mixer functionality.

Key Features

• 280 watt High-Performance Powered Speaker System Ultra Light Weight and Extremely Compact Soft touch top grip for easy handling. 10" Differential Drive® low-frequency driver with neodymium magnet for low-distortion and light weight 1" throat diameter next generation JBL neodymium compression driver Efficient Class-D digital amplifier technology Built-in 3 Channel Mixer 100° H x 60° V asymmetrical waveguide for uniform audience coverage Line level and direct microphone input capability Selectable Pre-engineered EQ settings Unique Mix/Loop signal flow function for extended system application Easy “daisy-chain”connections for extending the system Integrated M10 suspension points for easy rigging Multi angle enclosure for main or monitor applications Integrated 36 mm pole mount socket with stabilizing securing screw
• Highly designed composite enclosures for durability, lightweight, and acoustic performance

Technical Specifications

• System Power Rating : 280 W continuous 560 W peakFrequency Range (-10 dB) : 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)Dimensions (H x W x D) : 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)Frequency Response (±3 dB) : 70 Hz - 17 kHz (EQ in ‘Flat’ position)Coverage Pattern : 100° H x 60° V nominalMaximum SPL : 121 dB
• Net Weight : 7.7 kg (17 lb)

£525.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL EON515 - ACTIVE SPEAKER
Portable Self-Powered 15", Two-Way, Bass-Reflex Design In addition to acoustic performance the EON515 features three full size deep-well handles, light weight, and balanced ergonomics. The new generation of EON products offers true portability and ease of handling. Five standard M10 rigging points and integrated pole mount socket increase the system’s utility. The extremely rugged copolymer enclosure has been designed for main and 45° monitor orientation in the left and right hand configuration. A full screen-backed steel grille offers additional protection for both the woofer and compression driver components.

Key Features

• 450 watt High-Performance Powered Speaker System True portability weighing only 14.8 kg (32.5 lb) Multiple handles with comfort rubber grips for easy transport 15" Differential Drive® low-frequency driver with neodymium magnet for low-distortion and light weight 1" throat diameter next generation JBL neodymium compression driver Efficient Crown® Class-D amplifier technology Built-in 3 Channel Mixer 100° H x 60° V asymmetrical wave guide for uniform audience coverage Line level and direct microphone input capability Selectable Pre-engineered EQ settings Unique Mix/Loop signal flow function for extended system application Easy “daisy-chain” connections for extending the system Integrated M10 suspension points for easy rigging Multi angle enclosure for main or monitor applications Integrated 36 mm pole mount socket with stabilizing securing screw
• Highly designed composite enclosures for durability, lightweight, and acoustic performance

Technical Specifications

• System Power Rating : 450 W continuous 900 W peak Frequency Range (-10 dB) : 39 Hz -20 kHz (EQ in ‘Flat’ position) Dimensions (H x W x D) : 685 x 438 x 366 mm (27.0 in x 17.3 in x 14.4 in) Frequency Response (±3 dB) : 42 Hz - 18 kHz (EQ in ‘Flat’ position) Coverage Pattern : 100° H x 60° V nominal Maximum SPL : 129 dB
• Net Weight : 14.8 kg (32.5 lb)

£699.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL EON518s
ACTIVE SPEAKER

JBL EON518s - ACTIVE SPEAKER
Portable Self-Powered 18", Bass-Reflex Design The EON518S is an 18-inch, direct radiating, high performance powered compact subwoofer system. Designed to extend low frequency performance of any EON system. It also offers the convenience of an integrated crossover and stereo loop-thru capability. The EON518S is comprised of a 460 mm (18") Differential Drive® woofer driven by a 500 watt Class-D digital amplifier.

Key Features

• 500 watt High-Performance Powered Subwoofer System True portability weighing only 29.5 kg (65 lb) Compact enclosure Designed handles with comfort rubber grips for easy transport 18" Differential Drive® low-frequency driver with neodymium magnet for low-distortion and light weight Efficient Class-D digital amplifier technology Stereo balanced loop-through outputs Integrated and switchable High Pass Filter on loop-through outputs Easy “daisy-chain” connections for extending the system Polarity reverse selector Integrated 36 mm pole mount socket for sub/satellite applications
• Rugged DuraFlex™ finish

Technical Specifications

• System Power Rating : 500 W continuous 1000 W peak Frequency Range (-10 dB) : 36 Hz - 130 HzDimensions (H x W x D) : 617 mm x 569 mm x 652 mm (24.3 in x 22.4 in x 25.7 in)Frequency Response (±3 dB) : 42 Hz - 100 HzMaximum SPL : 129 dB
• Crossover Frequency : 120 Hz (HPF selectable on outputs)

£889.00 Inc VAT EACH

Active speaker power/signal cable. (SSL version is fitted with a UK 13a plug)

£36.00 each inc VAT for 10 metres

JBL MRX512M - PASSIVE SPEAKER
12in Two Way Bass Reflex Passive SpeakerThe MRX512 is a portable, twelve-inch, two-way speaker system designed specifically for sound reinforcment stage monitoring applications. The MRX512M is a premium, utility/monitor speaker. The MRX512M uses a JBL 262H 305 mm (12 in) Differential Drive® woofer and a 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver. A 70° x 70° horn provides smooth, even coverage whether used in the vertical (mains) or horizontal (monitor) orientation. NL4 connectors are provided on both ends of the speaker to keep cable runs tidy on stage when used in the monitor application and for easy access when used on tripods.

Key Features

• 12" Differential Drive® woofer for high-power capacity and very lightweight 1.5" annular polymer diaphragm compression driver Compact and low-profile for minimal obstruction of audience sight-lines 70° x 70° coverage for even and smooth response on and off axis Dual-angle pole socket for applications requiring tripod mounting Heavy Duty 16 gauge protective screen backed steel grille
• Tough DuraFlex™ enclosure finish

Technical Specifications

• Power Rating : 400W Continuous / 800 W ProgramFrequency Range : 60 Hz - 20k HzDimensions (H x W x D) : 645 mm x 380 mm x 345 mm (25.25 in x 15.0 in x 13.5 in)Sensitivity : 97dB SPLFrequency Response : 90 Hz - 20k HzNominal Impedance : 8 ohmsRated Maximum SPL : 129 dB SPL continuousCoverage Pattern : 70º x 70º nominalWeight : 14.9 kg (33.0 lbs.)High Frequency Driver : 1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
• Low Frequency Driver : 1 x JBL 262H 305 mm (12 in) Differential Drive® woofer

£529.95 Inc VAT EACH

JBL MRX518S - PASSIVE SUBWOOFER
18in Bass-Reflex Super Compact SubwooferThe MRX518 is a portable, eighteen-inch, subwoofer speaker system. The MRX518S is a compact, high power subwoofer system containing a 2044G 457 mm (18") woofer in a front-loaded, vented enclosure. The enclosure is designed to present a minimum frontal area. The system offers complete input connection flexibility for compatibility with a variety of cabling schemes.

Key Features

• 18 inch, 2044G driver for extended low-frequency output Large vent area for reduced distortion Low profile and compact
• Tough DuraFlexT finish enclosure
  

Technical Specifications

• Power Rating : 500W Continuous 1000W ProgramFrequency Range : 40 Hz - 200 HzDimensions (H x W x D) : 560 mm x 535 mm x 700 mm (22 in x 21 in x 27.5 in)Frequency Response : 45 Hz - 200 HzNominal Impedance : 4 ohmsSensitivity : 94 dB SPL; 100 dB SPLRated Maximum SPL : 127 dB SPL (133 dB SPL)* Calculated on half space conditionWeight : 32.5 kg (72 lb)
• Low Frequency Driver : 1 x JBL 2044G 457 mm

  The input panel incorporates a pair of Neutrik® Speakon® NL-4 connectors wired in parallel. The MRX518S is supplied with pins +1/-1 connected to the woofer. This may be easily reconfigured to work with cabling systems intended to drive subwoofers on pins +2/-2. For "Subwoofer/Satellite" configurations, the MRX518S is equipped with a top-mounted, 36 mm pole mount socket that can receive the optional SS3-BK pole. This can be used to mount speakers equipped with standard 35 mm pole sockets and weighing up to 50 kg (100 lbs). The enclosure is constructed of top quality plywood, coated in JBL's rugged DuraFlexT finish and is braced to maximize low-frequency performance. The attractive CNC-machined, 16-gauge steel grille is internally lined with an acoustically transparent screen to provide additional driver protection and give a very professional appearance.

£525.00 Inc VAT EACH

JBL MRX528S - DUAL PASSIVE SUBWOOFER
Dual 18in Bass-Reflex High Power SubwooferThe MRX528S is a portable, dual eighteen-inch, subwoofer speaker system. The MRX528S is a compact, high power subwoofer system containing dual 2044H 457 mm (18") woofer in a front-loaded, vented enclosure. The enclosure is designed to present a minimum frontal area. It is also configured in an upright format to permit the convenient stacking of fullrange enclosures on top without the need for an additional pole.

Key Features

• Dual 18 inch, 2044H drivers for extended low-frequency output Large vents for reduced distortion Vertical orientation for convenient ground stacking
• Tough DuraFlexT enclosure finish

Technical Specifications

• Power Rating : 1000W Continous / 2000W ProgramFrequency Range : 35 Hz - 250 HzDimensions (H x W x D) : 1095 mm x 535 mm x 700 mm (43 in x 21 in x 27.5 in)Sensitivity : 97 dB SPL; 103 dB SPLFrequency Response : 40 Hz - 250 HzNominal Impedance : 4 ohmsRated Maximum SPL : 133 dB SPL (139 dB SPL)*Calculated on half space conditionCoverage Pattern: : 70º x 70º nominalWeight : 55 kg (121 lbs.)
• Low Frequency Driver : 2 x JBL 2044H 457 mm (18 in.) woofers
  
  

  The system offers complete input connection flexibility for compatibility with a variety of cabling schemes. The input panel incorporates a pair of Neutrik® Speakon® NL-4 connectors wired in parallel. The MRX528S is supplied with pins +1/-1 connected to the woofer. This may be easily reconfigured to work with cabling systems intended to drive subwoofers on pins +2/-2.

£849.00 Inc VAT EACH

WARRIOR AUDIO
PSR8 PASSIVE SPEAKER

£189.00 Inc VAT (PAIR)

COME INSTORE FOR A DEMO

8" TWO WAY LOUDSPEAKER Key Features• High Impact Molded Polypropylene Enclosure
• 1.5' Voice Coil, 1' Exit Aluminium Compression Driver
• 5 Integral Suspension Points
• Complete Mounting Solutions
• Smooth Response With High Power Handling Capacity (Continuous Program/RMS), 480W/120W
• 90 x 60 Coverage Pattern

Technical Specifications

• Freq. Range (-10dB): 60Hz~20kHz Freq. Response (-3dB): 75Hz~20kHzRec.Hipass Frequency: 50Hz Axial Sensitivity: 94dB(1W/1m) Max Calculated SPL: 120dB Rated System Power: 120W Continuous 480W Peak LF Transducer: 08L120-82 HF Transducer: 25H34-82 Crossover Frequency: 2.0kHz Nominal Impedance: 8 Ohms Connector: 2 x NL4 Speakon Dim (HxWxD): 435mm x 255mm x 245mm Net Weight: 8Kg Shipping Weight: 9Kg Horizontal Coverage: 90º
• Vertical Coverage: 60º

WARRIOR AUDIO
PSR8A ACTIVE SPEAKER

£279.00 Inc VAT (PAIR)

POWERED 8" TWO WAY LOUDSPEAKER 150W Key Features• High Impact Molded Polypropylene Enclosure
• 1.5' Voice Coil, 1' Exit Aluminium Compression Driver
• 5 Integral Suspension Points
• Complete Mounting Solutions
• Smooth Response With High Power Handling Capacity (Long Term/Max), 114dB/117dB
• 90 x 60 Coverage Pattern

Technical Specifications

• Freq. Range (-10dB): 60Hz~20kHz Freq. Response (-3dB): 75Hz~20kHz Rec.Hipass Frequency: 50Hz Max Calculated SPL: 117dB Amplifier Power LF: 100W Amplifier Power HF: 50W LF Transducer: 08L120-41 HF Transducer: 25H34-82 Crossover Frequency: 3.5kHz Loop/Mix Out: XLR/M,Balanced AC Input: 110/220 V, AC, 50/60Hz, 180 Watts Dim (HxWxD): 435mm x 255mm x 245mm Net Weight: 9.5Kg Shipping Weight: 11Kg Horizontal Coverage: 90º
• Vertical Coverage: 60º

WARRIOR AUDIO
PSR12 PASSIVE SPEAKER

£329.00 Inc VAT (PAIR)

12" TWO WAY LOUDSPEAKER Key Features• High Impact Molded Polypropylene Enclosure
• 1.75' Voice Coil, 1' Exit Titanium Compression Driver
• 5 Integral Suspension Points
• Complete Mounting Solutions
• Smooth Response With High Power Handling Capacity (Continuous Program/RMS), 1200W/300W
• 80º x 60º Coverage Pattern

Technical Specifications

• Freq. Range (-10dB): 40Hz~20kHz Freq. Response (-3dB): 50Hz~18kHz Rec.Hipass Frequency: 30Hz Axial Sensitivity: 98dB(1W/1m) Max Calculated SPL: 130dB Rated System Power: 300W Continuous 1200W Peak LF Transducer: 12L300-81 HF Transducer: 25H44-81 Crossover Frequency: 2.0kHz Nominal Impedance: 8 Ohms Connector: 2 x NL4 Speakon
• Dim (HxWxD): 615mmx416mmx356mm
  Net Weight: 21Kg
  Shipping Weight: 24Kg
  Horizontal Coverage: 80º
  Vertical Coverage: 60º
  

WARRIOR AUDIO
PSR12A ACTIVE SPEAKER

£499.00 Inc VAT (PAIR)

POWERED 12" TWO WAY LOUDSPEAKER 350WKey Features• High Impact Molded Polypropylene Enclosure
• 1.75' Voice Coil, 1' Exit Titanium Compression Driver
• 5 Integral Suspension Points
• Complete Mounting Solutions
• Smooth Response With High Power Handling Capacity (Long Term/Max), 118dB/124dB
• 80 x 60 Coverage Pattern Specifications

Freq. Range (-10dB): 40Hz~20kHz
Freq. Response (-3dB): 50Hz~18kHz
Rec.Hipass Frequency: 30Hz
Max Calculated SPL: 124dB
Amplifier Power HF: 50W
Amplifier Power LF: 300W
LF Transducer: 12L300A4
HF Transducer: 25H44A8
Crossover Frequency: 2.2kHz
Loop/Mix Out: XLR/M, Balanced
AC Input: 110/220V, AC, 50/60Hz, 300 Watts
Dim (HxWxD): 615mm x 416mm x 356mm
Net Weight: 25Kg
Shipping Weight: 28Kg
Horizontal Coverage: 80º
Vertical Coverage: 60º